Showing posts with label diy. Show all posts
Showing posts with label diy. Show all posts
Monday, November 12, 2018
Art of wing
תוויות:
Aluminum Profiles Template,
balsa,
Brodak,
building,
Continue work on the wing,
discovery-aeromodels,
diy,
evolutionengines,
ilya_sobollev,
rcmodel,
The process of building a wing,
windy,
wing,
wood
Wednesday, November 7, 2018
Art of wing
תוויות:
Aluminum Profiles Template,
balsa,
Brodak,
building,
Continue work on the wing,
discovery-aeromodels,
diy,
evolutionengines,
ilya_sobollev,
rcmodel,
The process of building a wing,
windy,
wing,
wood
Monday, November 5, 2018
Art of wing
תוויות:
Aluminum Profiles Template,
balsa,
Brodak,
building,
Continue work on the wing,
discovery-aeromodels,
diy,
evolutionengines,
ilya_sobollev,
rcmodel,
The process of building a wing,
windy,
wing,
wood
Thursday, November 1, 2018
LEGACY
תוויות:
balsa,
control line,
control line rc,
Control Line World Championships,
diy,
ilya_sobollev,
legacy,
model aircraft,
rc control,
rcmodel,
sig,
stabilizer,
woodart
Monday, July 30, 2018
Friday, November 4, 2016
stabilizer
תוויות:
aero Club,
ama,
Brodak,
building,
diy,
f2b,
stabilizer,
windy,
Yatsenko,
טיסני כבלים,
טיסנים,
קלוב תעופה
Wednesday, October 26, 2016
Finish Wing
תוויות:
control line,
diy,
f2b,
Finish Wing,
World Cup F2B,
טיסני כבלים,
טיסנים
Monday, October 17, 2016
The process of building a wing
The process of building a wing
*Post updated course of work*
I chose this profile Profiles Template
![]() |
| Profiles Template |
Preparation of profiles:
Then use a new method to create a very good profile.
and cutting aluminum for profiles template.
For profiles I've used with balsa 1.5mm
Location profiles in the mold
13 profiles for each side
Unfortunately no pictures of the process of refinishing and cutting of profiles...
----------
After refinishing of profiles.
Final result.
In conclusion:
I highly recommend this method of preparation of the the profiles only if your profile is symmetrical,
Because it is very accurate and easy to work
I think the most correct method creates a profile symmetrically equal on both sides.
wing:
Placing the profiles and test measurements.
Continued work and testing before gluing.
Placing beam and flow edge.
Continue work on the wing.
I chose a steering axis of sig.
Closing a box structure.
Wing tip:
Fnish:
תוויות:
aero Club,
Brodak,
control line,
discovery-aeromodels,
diy,
dvir bason,
f2b,
FAI,
rc control,
The process of building a wing,
windy,
World Cup F2B,
Yatsenko,
טיסני כבלים,
טיסנים
Subscribe to:
Posts (Atom)




































